BT6308-CL Total Residual Chlorine Analyzer

Product Details

BT6308-CL Total Residual Chlorine Analyzer

The BT6308-CL Total Residual Chlorine Analyzer of Bebur Company adopts a membrane or membrane-free three-electrode system. It is not affected by pH value changes, does not use reagents, has stable performance, can reduce maintenance and save user usage costs.

BT6308-CL Total Residual Chlorine Analyzer

Typical Applications

The BT6308-CL Total Residual Chlorine Analyzer is applicable to residual chlorine disinfection monitoring in the drinking water, sewage, industrial process water and pure water industries, such as:

▪Online analysis of Residual Chlorine Disinfection in Municipal Tap water

▪Chlorine replenishment control for secondary pressurized water supply in the pipeline network

▪Disinfectant control of circulating cooling water

▪Chlorination disinfection control of water used in food factories and beverage factories

Performance characteristics

▪Sensors based on membrane or membrane-free amperometric principles are adopted

▪Stable performance and accurate measurement

▪No reagents or buffers are required

▪It is not affected by the cleaning agents in water

▪No zero-point calibration is required

▪A 6-month maintenance-free period

▪A three-month no-bid period

Working principle

The sensor measures samples using the principle of membrane or membrane-free amperometry. The microporous hydrophobic membrane on the sensor allows residual chlorine (HCLO and CLO- ions) or total chlorine (HCLO,CLO- ions and bound chlorine) to enter the sensor. Inside the sensor, this process converts most of the CLO- ions into HCLO, which is consumed at the gold working electrode to obtain a value of mg/L or ppm.

Technical parameters

Type	Residual chlorine	Zero residual chlorine	No residual chlorine in the membrane	Total chlorine
Sensor model	BWCS4	BWCN1.1	BWCCF1.0N	BWCP4.0
Range (ppm)	0.01-2,0.01-5,0.01-10,0.01-20,0.5-200	0.005-2,0.05-20	0.05-10	0.05-0.5,0.01-2,0.01-5,0.01-10,0.01-20
Resolution	0.01	0.001	0.01	0.01
Stability	-1% per month	-3% per month	-1% per month	-1% per month
Working electrode	gold	gold	gold	gold
Reverse electrode	Stainless steel	Stainless steel	Stainless steel	Stainless steel
Reference electrode	Silver/Silver halide	Silver/Silver halide	Silver/Silver halide	Silver/Silver halide
Membrane material	Microporous hydrophilic membrane	Microporous hydrophilic membrane	_	Microporous hydrophilic membrane
quantity of flow	Approximately 500ml/min	Approximately 500ml/min	Approximately 500ml/min	Approximately 500ml/min
Temperature range	0-45°C	0-40°C	0-45°C	0-45°C
Temperature compensation	It is automatically completed by an integrated thermistor	It is automatically completed by an integrated thermistor	It is automatically completed by an integrated thermistor	It is automatically completed by an integrated thermistor
pH value range	pH4-9	pH6.5-9	pH6-9	pH4-12
First polarization time	About 2 hours	About 2 hours	About 15 minutes	About 2 hours
Repolarization time	About 30 minutes	About 30 minutes	About 15 minutes	About 30 minutes
Response time	The T90 lasts approximately 120 seconds	The T90 lasts approximately 120 seconds	The T90 lasts approximately 20 seconds	The T90 lasts approximately 180 seconds
Zero-point calibration	No need	No need	No need	No need
Calibration	Calibrate using DPD	Calibrate using DPD	Calibrate using DPD	Calibrate using DPD
Material	PVC-U, stainless steel, microporous hydrophilic film, silicone	PVC-U, stainless steel, microporous hydrophilic membrane, silicone, PEEK	PVC-U	PVC-U, stainless steel, microporous hydrophilic membrane, silicone, PEEK
Overall dimensions	Diameter: 25mm, length: 190mm	Diameter: 25mm, length: 195mm	Diameter: 25mm, length: 131mm	Diameter: 25mm, length: 190mm
Interference	CLO2，O3	CLO2，O3，Reducing agent	CLO2，O3	CLO2，O3