Online Chlorine Dioxide Analyzer For Water

Product Details

BT6308-CD Online Chlorine Dioxide Analyzer

The Bebur BT6308-CD Online Chlorine Dioxide Analyzer For Water sensor adopts a membrane that is less affected by chlorine, featuring stable performance, low maintenance and long service life.

Online Chlorine Dioxide Analyzer For Water

Typical applications

▪ Online monitoring of chlorine dioxide concentration applicable to the disinfection and sterilization processes of drinking water, polluted industrial process water and pure water, such as:

▪Precise chlorination control for municipal water quality disinfection and secondary water supply disinfection

▪Chlorination disinfection control of water used in food factories and beverage factories

▪Disinfectant control during the cleaning process of fruits and vegetables

▪Water quality monitoring of medical sewage and other wastewater

Performance characteristics

▪The sensor adopts the diaphragm amperometric principle

▪Stable performance and accurate measurement

▪No reagents or buffers are required

▪It is not affected by cleaning agents in water

▪It is less affected by residual chlorine

▪Maintain it once every six months

▪It is applicable to most fields of drinking water and process water for process control

Working principle

The membrane-type chlorine dioxide sensor is a dual-electrode system of membrane-type amperometric polarography, which eliminates zero drift by increasing the current potential. No reagents or buffers are used, and its calibration method is one-point calibration (no need to calibrate the zero point).

The Bebur Online Chlorine Dioxide Analyzer For Water is suitable for occasions where high reliability and ease of operation are required.

Technical parameters

Sensor	Membrane amperometric polarographic dual-electrode sensor
Sensor model	BWCD10.1
Application	Water treatment
Type	Membrane amperometry
Measurement	Chlorine dioxide
Range	0.005-0.5mg/L; 0.005-2mg/L; 0.05-5mg/L; 0.05-10mg/L; 0.05-20mg/L；0.5-200mg/L
Resolution	0.001 mg/L，0.01 mg/L，0.1 mg/L
Repeatability	＜1%
Working temperature	0-50℃
Temperature compensation	Automatic compensation is achieved through an integrated temperature sensor
Work pressure	0-0.5bar
Flow rate	0.5L/min
pH value range	pH1-pH12
Initial polarization time	About 1 hour
Response time	The T90 lasts approximately 60 seconds
Zero-point calibration	No need
Calibration	Calibrate using the DPD method every one week to three months
Membrane cap	It is recommended to replace it every 12 to 18 months
Electrolyte	It is recommended to replace it every 3 to 6 months (depending on the water quality).
Interference	O3、CL2
Installation method	Open circulation pool