BTP8300 Portable Cleanliness Monitor

BTP8300 Portable Cleanliness Monitor

The Bebur BTP8300 Portable Cleanliness Monitor uses the principle of photometric obscuration to detect invisible particles (photometric obscuration principle) and is used to detect the size and quantity of solid particles in liquids. When the particles in the sample move between the light source (laser diode) and the detector, they block the light, resulting in a reduction in the light signal received by the detector. This reduction is directly proportional to the equivalent size of the particles.

The BTP8300 Portable Cleanliness Monitor can be used for the detection of oil contamination degree, flocculation optimization, oil well water injection, tap water, lake water, etc. It features fast detection speed, strong anti-interference ability, high precision and good repeatability.

Application field

The BTP8300 Portable Cleanliness Monitor can be widely applied in military logistics support and in fields such as aviation, aerospace, power, petroleum, chemical engineering, transportation, ports, metallurgy, machinery, automobile manufacturing, etc. The solid particle contamination degree, viscosity and moisture content of aviation kerosene, hydraulic oil, lubricating oil, transformer oil (insulating oil), turbine oil (turbine oil), gear oil, engine oil, water-based hydraulic oil and other oil liquids are tested. The insoluble particles of organic liquids and polymer solutions are detected, and the filtration process is monitored (such as filter beds, membrane filtration, ceramic filters, etc.). Finished product quality monitoring (such as pure water for medical preparations, cleaning agents, etc.), industrial process optimization (such as flocculation optimization, oil well water injection), equipment wear detection, fluid cleanliness detection, scientific research analysis.

Performance characteristics

Wide measurement range: 1μm to 400μm(standard version); 2μm-750μm(Customized)

User-defined measurement channels can be up to 32, and more channels can be customized (up to 1000).

实Real-time alarm, data storage, printing function, calibration function, self-check function, data download and copy function, etc

On-site software calibration can be achieved without returning to the factory

The analog signal output of the sensor facilitates the detection of the sensor's working status

Powered by electricity or battery, suitable for laboratory or field operations

Instrument parameters

Measured particle size: 1μm to 400μm(standard version); 2μm-750μm(Customized)

Measurement channels: 8 channels, 32 channels are available for selection, and up to 1,000 channels can be customized

Flow rate: 10mL/min to 50 mL/min, and can be set by yourself

Test time: ≤2 minutes

Limit of coincident error: 10,000 per milliliter

Measurement accuracy: less than ± 5% for 2 microns, less than ± 10% for 5-10 microns

Printing function: It has the functions of data plotting and overall printing. Built-in printer for hard copy

Calibration function: Manual/automatic calibration, automatic cleaning/cleaning detection, and automatic system alarm

Other functions: It has self-checking function (self-check upon startup/set regular self-check by yourself), supports online detection function, online communication function, and supports USB and I/O port connection

Power supply: 110-240VAC, globally applicable

Appearance dimensions: 30.5x25x15 cm, 2.5kg(excluding battery pack)

Attachment: Sample injection and output pipelines, instrument backpack (standard configuration)

Sensor cleaning kit, calibration work kit (optional)